How to Make Fishing Jig Heads – [Easy Tips and Tricks 2023]

You won’t believe this, but manufacturing your own jig heads may not only saving you money on the costs of fishing. In addition, it can also be a fun way to spend time with friends and reflect about past fishing adventures. How to make fishing jig heads is an important question right now. Making jig heads is not only a fun and rewarding pastime. But it can also be a source of supplemental revenue if you want to sell the extras you produce.

It is possible to make jig heads with little effort if the necessary equipment use. This process may carry out either inside or outdoors, depending on the temperature and the availability of well-ventilated spaces.

You will discover an overview of the overall process of producing jig heads throughout this page. As well as a list of all of the conditions that must be met in order for your act of manufacturing jig heads to be successful.

What Is Fishing Jig?

Fishing Jig Head

This method of fishing is very efficient and may yield large numbers of fish attract in little time. Polymers, metals, and sometimes even wood may all use to make jigs. Rockfish, trout, and tuna may all catch with a bobbing rod.

To jigger, you must first choose the proper jig. You may use forks, worm, and jigs with weights on the top to catch fish. Also, jigs attached to the end of a hook may be used with baits like worms and shrimp.

Make that the jig is correctly weighted after selecting it. For example, you might use metal or thick wire.

Safety Precautions For Jig Head Making

Safety Precautions For Jig Head Making

If you’re going to work with high temperatures, you need to be sure that you’re taking safety precautions. A melted pot is necessary for the production of jig needles. It’s possible to buy fixed melting jars, which rest on a flat surface like a table or workstation, or mobile melted pots, which let you pour lead by hands.

Hand Held Melting Pots

At the end of the loop is an electric wire that is hooked into a 110-volt outlet for drinking hot lead. The permanent melting jars are easier to handle than the finger melting pots, which are the more traditional design. By the time you open the mold and remove the leads from the cavity. Because it’s already solidified to a perpetual state.

Stationary Melting Pots

With the fixed melting pot, lead overflows are less likely to occur since the handle may be released more precisely each time, allowing for more exact lead readings.

When producing jig heads, stationary melting jars are easier to operate than hand-held pots since they demand less attention. For me, the most effective and easiest fishing technique to melt lead is to use a fixed lead melted kettle.

Less the lead handling you have to do, the better off you will be. When using a handed melting pot, the user’s wrists and arms might get fatigued, increasing the risk of a crash. In contrast, the lead can be released from a fixed melting pot by simply flipping or elevating the handles.

What’s The Best Jig Head Size?

Depending upon the type of lure use, a variety of jig head sizes are available. For freshwater fishing, the most popular sizes vary from 11/32 to 1/2 ounce. Whereas for fishing boats, the largest sizes are typical. The very same jig heading hook may use with multiple weight divisions of jigheads for a variety of lure styles.

 The slower the lures fall, the lesser the jig head mass. The smaller the length of the line, and the shorter the pound-test line toughness may be.

Heavy jig heads cast farther and fall at water depths quicker than lesser middle weight jig heads. Also, they often need stronger pound setting expectations strength to cast and retrieve them. To a lesser extent, smaller or heavier freshwater jig heads may use with most plastic lures, although this is not always true.

Where Do I Find Hooks for Making Jig heads?

A variety of hooking may find on and Mustad and Eagle Claw are two of the most popular brand name hooks. Mustad and Eagle Claw are two of the most popular brands of jig head hooks, and they’ve been around for a long time and use by fishermen all around the globe, myself included.

My go-to hooks in the 1/16 and 1/8 ounce weight category is the Eagle Claw Red 570-1/0. Fish and Feathers in Springfield, MO, or on, are where you may get Red Eagle Claw hooks.

Where Do I Find Lead For Making Jig Heads?

It is available via Walls Tackle Supplies and the 1724 Apiary Farm Etsy store. Local tire stores may also have outdated wheel weights that contain lead. In general, wheel weights compose of tougher lead, which is preferable for jig heads.

However, soft lead may also use for jig heads. Using metal scrapyards to get lead for sinking and jig head manufacture might be a more cost-effective option.

How to Make Jig Heads Step by Step

How to Make Fishing Jig Heads

01 Step: Place the table in a location that is free from both children and animals. Use an extractor fan, open windows and door locks, and put on a mask to guarantee that there is sufficient ventilation.

02 StepOn the table, arrange all of the jig head equipment such as side cutters, locking pliers pliers, dipped spoons, and the melted pot.

03 Step: To start dissolving lead, place lead that allow to cool or become solid into the melting pot and then connect the melting pot into such an inlet.

04 Step: To use the dipping spoon, remove any debris that has accumulated on the surface of the molten lead. Then, place pegs in the mold and make sure it seal securely.

05 Step: Pour lead into the casting holes in a slow and cautious manner until you are almost to the top of the specimen. The lead ought to become more stable almost instantly. 

06 Step: Crack up the mold and use needle-nose pliers to remove the jig heads. Remove any surplus lead from the jig heads. Carefully place any extra solidified rebound back into the melting pot and used the dipped spoon or syringe pliers, taking precautions to prevent lead from spilling out of the pot.

07 Step: Ten to fifteen minutes of additional cooling time should pass before jig heads are put away for storage. When you are done, you must wait until the melting pot has fully cool down prior preserving it. This may take up to an hour.

05 Techniques For Fishing With Jig Heads

Today, we are having a look at a few of the many jig heads and methods that Big Bites will have to provide with regard to our soft plastic offerings. It’s possible that you’re already familiar with these jig layouts, while others could be completely foreign to you. I really hope that this will assist you in catching additional bass so that your boat can look as good as mine does!

Wacky Jig Head

For many bass fishermen over the last several years, wacky rigging using plastics has become a popular alternative to traditional rigging methods. A 60 degree eye Gamakatsu deficit means hook is the foundation of the Big Bites Wacky jig head. This hook ensures a secure connection each and every time the hook is placed.

To meet all of your depth requirements. The Wacky jig head is available in sizes ranging from 1/32 ounce to 3/8 ounce. Wacky baits like as 4″ and 6″ Finesse Worms, Trick Sticks, and Shaking Squirrel are popular choices among Big Bite customers.

Ball Head Jig

This is the place where it all began, and it continues to play a significant role in fishing line today. The typical ball head jig is something that should be included in every angler’s tackle box. Why, therefore, should one choose the finesse jig head rather than the ball head jig? The drop is relevant to our discussion.

The hook eye on the ball head jig is set at an angle of ninety degrees, whereas the hook eye on the head of the finesse jig is set at an angle of sixty degrees.

The biggest difference between the two types of jigs is that the hook eye set at ninety degrees will consider giving the jig a plain falling presentation, whereas the hook eye set at sixty degrees will give the dexterity jig something of a gliding activity as it Allow me to provide one scenario in which each of these jigs might be useful.

Finesse Worm Jig Head

We are targeting bass that are actively moving about on top of the edge of the weeds where we are fishing. I will go with the alternatives for the precision jig head since. Because it will allow my bait to descend with a more natural gliding motion than the other possibilities. I plan to utilize a variety of baits, including Trick Sticks, Precision Worms, and Grubs, to mention just a few examples.

Fintwist Head

The Fintwist Head is a jigger that resembles a ball head but modify with a twist that secures the plastics in place. This is the headpiece that I will use to rig my baits option on if I am going to be fishing in bushes or near weeds. Include in this category such baits as Squirrel Tail, Precision Worms, Trick Stick, and Throw-In Pipes.

Fintwist Stand-Up Head

After doing the Stand-Up Fintwist, you should now be able to perform a rock jig. This is an example of a Shaky Head Jig through and through. But I’ve discovered that it also works for various types of presentations.

I hooked a 3″ Yomamma on to a Stand-Up Fintwist because I needed a more effective approach to deliver finesse craw presentations on the rocks.

After that, I got to work. This presentation quickly became my go-to bait whenever I needed a bite to satisfy a tournament limit while I was fishing on or near rocks.

It was especially useful when I was fishing for bass. To mention just one of many possible choices for fishing with plastics, I also like to fish with a tube head when I use this rig.

In the previous several seasons, I have relied on this presentation, and it has not only helped me fill a competition bag when it was necessary. However, on one occasion, it also helped me catch the largest bass of the competition.

Final Thought

Now you know – how to make fishing jig heads? You can match these jigs together with your favorite Big Bite plastics. Also, you will have a combo that will hunt and fish that swim in all seas. Looking at all of the Jig Heads that Big Bites has to provide is just exploring the possibilities.

 If you have a unique rigging that you are currently using and you would want to share this with other Big Bite fisherman. Please visit the Big Bite page on Facebook and discuss your presentations with us.

1 thought on “How to Make Fishing Jig Heads – [Easy Tips and Tricks 2023]”

Leave a Comment