fishing-try-logo-300x77

How To Fix A Push Button Reel – Easy Way 2022

Considering you would like tips on how to fix a push button reel: If your push-button reel is not working properly, there are a few things you can do to try and fix it. You should start by making sure the charges are new and properly placed.

If the batteries seem fine, then the next thing to check is the contact points between the button and the circuit board. Sometimes these points can become corroded or otherwise damaged, which will prevent the button from making a proper connection. A cotton swab moistened in denatured alcohol may be used to wipe the interface.

Once they are clean, put new batteries in and try again.

  • Unscrew the faceplate of the push button reel using a Phillips head screwdriver
  • Remove the spring and spool from inside the reel body
  • Inspect the spring for breaks or kinks, and replace it if necessary
  • Wrap the new spring around the spool, making sure that it is tight and free of twists
  • Reassemble the push button reel by screwing on the faceplate securely

How to Respool a Push Button Reel

If you have a push button reel that needs re-spooling, there are a few things you need to do. First, remove the spool from the reel. Next, cut off any old line that is on the spool.

When it is complete, a fresh line must be wound onto the spool. To do this, start at the center of the spool and wind the line around until you reach the outside edge. Then, continue winding around the outside of the spool until you reach the center again.

When you are finished re-spooling, put the spool back on the reel and make sure it is secure.

How Do You Reline a Push Button Reel?

If your push button reel is starting to show signs of wear, it might be time to give it a little TLC in the form of a new line. This process, known as relining, is actually not that difficult and only requires a few supplies that you likely already have around the house. It’s also a fantastic method of keeping your favorite reel around for longer!

Here’s how to do it:

  1. First, you’ll need to remove the old line from your reel. To do this, start by disconnecting the end of the line from whatever it’s attached to (likely a lure or swivel). Then, use your fingers or a pair of pliers to carefully unwind the line from the spool. If there are any knots or tangles, use a knife or scissors to cut them away.
  1. Once all of the old lines has been removed, it’s time to prepare the new line for installation. Start by cutting off a length that is about twice as long as the circumference of your reel’s spool. Then thread one end of the new line through each eyelet on your reel (there should be 4-6 eyelets total).
  1. Now it’s time to start winding on the new line! Begin by holding onto both ends of the newline and wrapping it around your index finger several times. This will create a “base” for winding which will help keep everything tidy. Next, start winding, the newline onto the spool in even layers until you reach the desired amount (usually about 10-15 yards).

    Be sure not to overfill the spool – if you Do, the excess Line could come undone while you’re fishing and become tangled!
  1. Once The spool is filled to capacity with Newline, tie an Overhand knot at Both ends Of the Line, being sure to leave A few Inches of Slack On each side.

    Trim away any excess Line, then reconnect whatever You were using At The end Of The old Line (a Lure or Swivel). And That’s All There Is to It!

Why is My Reel Not Clicking?

If your fishing reel is not clicking, it could be for a number of reasons. The first thing you should check is whether the clicker itself is functional. To do this, simply try moving the clicker arm back and forth with your finger.

If you hear a clicking sound, then the clicker itself is likely fine. Next, you should check to see if the spool is properly seated in the reel. If it’s not, then that could be why the reel isn’t clicking.

To fix this, just remove the spool and make sure that it’s seated correctly before putting it back in place. Another possible reason why your reel isn’t clicking could be because there’s something blocking the clicker arm from moving freely. This could be dirt or debris that’s gotten caught in between the arm and the body of the reel.

To fix this, just use a small brush or toothpick to clean out any obstruction that might be present. Lastly, if none of these other solutions work, then there may be an issue with the internal gears of your reel. This is generally more serious and will require taking apart the reel to inspect (and potentially replace) damaged parts.

How Do You Wind a Push Button Reel?

Considering you are talking about a fishing reel: To wind a push-button reel, first, remove the spool by unscrewing the knob at the top. Next, thread your line through the guides on the rod, and then through the appropriate holes in the spool.

Once your line is secured to the spool, begin winding it around evenly, making sure not to overlap the turns. Finally, screw the knob back on to secure the spool.

What is a Push Button Reel Called?

A push button reel, also known as a spin cast reel, is a type of fishing reel that is easy to use and requires little maintenance. The push-button reel has a closed housing that encloses the gears and line, making it more durable than other types of fishing reels. The push button on the side of the reel allows you to release the line with a simple push, making it ideal for novice anglers.

Final Say

If your push button reel is having issues, there are a few things you can do to fix it. First, check to see if the button is jammed or stuck. If it is, try gently pushing and pulling on the button to loosen it.

Sometimes the button just needs to be reset in order for it to work properly. If the button seems to be fine, then the issue may be with the inner workings of the reel. You can try taking apart the reel and cleaning out any dirt or debris that may be causing problems.

Be sure to put everything back together correctly before using the reel again. If you’re still having trouble, it’s best to consult with a professional or take the reel back to where you bought it for further assistance.

Leave a Comment