fishing-try-logo-300x77

How to Fix a Push Button Fishing Reel – Best Way 2022

If you’re an avid fisherman, then you know that something on your fishing reel is going to go wrong. It might be a small problem, like a push button that’s not working correctly. But have no fear; there’s a simple solution to Fix a Push Button Fishing Reel.

All you need is a Phillips head screwdriver and a few minutes of time.

  • Open the fishing reel by unscrewing the screws that hold it together
  • Inspect the parts for damage and replace any damaged parts
  • Use a thin oil to lubricate all of the working components.
  • Reassemble the fishing reel and screw it back together

Fishing Reel Won’t Reel in Line

There are several things you may do if your fishing reel will not reel in line, and each one is a potential solution to the issue. First, determine if the line is braided or has any knots in it. If it is, try gently untangling it with your fingers. If that doesn’t work, you can use a pair of pliers to carefully loosen the knots. 

Once you’ve checked for tangles, take a look at the spool of line on your reel. Check to see that it has not been emptied – if it is, simply refill it with fresh line.

If there’s still line on the spool but it’s not coming out when you try to reel it in, there may be something blocking the path of the line (such as dirt or debris). Carefully remove whatever is blocking the way and then try reeling in again. If nothing of these potential fixes is successful, there may be a problem with the fishing spool directly.

If this is the case, you should probably take it to a specialist or just get a new one entirely.

How Do I Put New Line on a Push Button Reel?

Assuming you are talking about a button on a fishing reel: To put new line on a push button reel, first remove the old line. To do this, unscrew the spool cap and pull the line through the eyelet.

Cut off any remaining line, being careful not to damage the eyelet in the process. Next, thread your new line through the eyelet (if it is not already pre-threaded). Start by tying an overhand knot around the base of the eyelet.

Then, wind your new line onto the spool in a clockwise direction until it is tight against the side of the spool. Once you have about six inches of slack, cut off any excess line. Finally, screw on the spool cap and test your new setup by giving it a few practice casts.

How Do You Reline a Button on a Fishing Reel?

If you have a fishing reel that is in need of a new line, the process of relining it is not difficult. You will need to purchase some new fishing line, as well as a few other supplies. The first thing you’ll want to do is take the old line off the reel.

In order to do this, you will have to remove the spindle from the reel by unscrewing the screws. Once the spool is removed, you can simply cut away the old line and discard it. Next, you will need to thread your new fishing line through the guides on the reel.

Start by threading the line through the first guide, and then wind it around the spool several times. Once you have wound enough line around the spool, thread it through the second guide and continue winding it until all of the desired amount of line is on the spool. Once your new fishing line is in place on the spool, screw it back onto the reel body.

Make sure that it is screwed on tightly so that it doesn’t come loose while you are using your reel, and fix your push button fishing reel.

Why Does My Fishing Reel Not Click?

Fishing reels are designed to click when the spool is turned. This clicking noise lets the angler know that the line is being released and prevents the line from being tangled. Sometimes, however, fishing reels do not click.

There are a few reasons why this may happen: The most common reason why a fishing reel does not click is because it needs to be oiled. The parts of the reel that make the clicking noise can dry out and become sticky over time, causing the clicking noise to disappear.

Oiling these parts will usually fix the problem. Another reason why a fishing reel may not click is because there is something preventing it from working properly. This could be something as simple as a piece of dirt or sand jammed in the mechanism, preventing it from moving freely.

Cleaning out the reel and lubricating it should fix this problem. In rare cases, a fishing reel may not click because it is defective.

What is a Push Button Reel Called?

A push button reel is a type of fishing reel that uses a push button to release the line. There are a few other names for the push button reeled, including the rotating reel and the baitcasting reel. The push button reel is designed for use with lighter tackle and smaller fish.

Final Say

It is essential to have a working knowledge of how to Fix a Push Button Fishing Reel if your fishing reel contains one. If you don’t do this, you won’t be able to use your reels and you’ll be trapped.

There are three main parts to a push button fishing reel: the handle, the spool, and the drag washer.

  • To begin, you will need to detach the handles from the spool. This is the first step. 
  • Then, you’ll need to remove the spool by unscrewing it from the body of the reel. 
  • Next, take out the drag washer and inspect it for damage.

In the event that it is broken, you will be required to purchase a new one to take its place. Finally, put everything back together in reverse order and screw everything tight.

Leave a Comment